חלקי חילוף למכוניות TRAXXAS
Rear suspension arm set includes upper right & left and lower right & left suspension arms
(upper) (x2) Fits T-Maxx®/E-Maxx
Suspension arm upper (1)/ suspension arm lower (1) (left rear) (fits Slayer Pro 4x4)
Suspension arms, front (left & right) For Jato
Replacemen left and right 30° caster blocks For Nitro Rustler
Suspension screw pin set, hardened steel (hex drive)
Body mount posts, front & rear (tall, for Summit)
Skidplate, transmission, nylon (black)/ cover Fits E-Revo VXL Brushless, Summit
Suspension arms (L&R) (front) (2)
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front outer half shaft come assembled with stub axle. Fits left or right. Requires 6828A differential output assemblies for complete driveshaft assembly.
Suspension arm upper (1)/ suspension arm lower (1) (right rear) (fits Slayer Pro 4x4)
For Jato
For Revo, Slayer Pro 4x4, T-Maxx
For T-Maxx
For Bandit
Flywheel fits Nitro Rustler®, Nitro Sport, Nitro Stampede®, and T-Maxx®.
Pair of 6x10x8 mm needle roller bearings For Revo, Slayer Pro 4x4
Wrist pin with G-spring retainers (2) for the TRX® 3.3 engine.
Cooling head gaskets: 0.20, 0.30, 0.35 mm (1 each) for TRX® 3.3 engines.
Suspension arms upper (1)/ suspension arm lower (1) (right front)
Upper and lower rear suspension arms. Fits left or right For Revo
Upper and lower steering arms with integrated servo saver, servo saver spring, and steering arm shaft.
Replacement steel rocker arm posts (2)
Replacement 43-tooth 1st speed transmission gear
The driveshaft rebuild kit includes all the metal parts to rebuild two driveshafts including driveshaft carriers (4), 4.5 mm cross pins (4), 3 mm cross pins (4), and E-clips (20).
Replacement front shock tower
Replacement rear shock tower
For Nitro Rustler
Replacement servo case for standard #2018 servo
The servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear damage.
Replacement XX-long steel shock shafts with chrome finish for Traxxas Ultra Shocks (2)
The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation
Replacement 82 mm metal turnbuckles(2). Rod ends sold separately
Pinion gear 28Tooth(48-pitch) fits 3 mm motor shafts and includes set screw Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Set of four replacement cush-drive pads for EZ-Start® 2.
Throttle return springs (2) (Fits Revo® and Slayer)
Half shafts, center front (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external splined (1)) (plastic parts only)
GTR 5460-series shock hardware includes upper caps with hollow balls (2), bottom caps (2), and upper and lower spring retainers (2).
Replacement stainless steel shock shafts for 5460-series GTR shocks (2)
The GTR shock rebuild kit includes the parts needed to refresh two 5460-series GTR Shocks. The package includes silicone X-rings, bladders, bump stops, pistons, and hardware.
Chrome light bar set includes front bumper and roof light bars For Summit
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Upper and lower steering arms with steering link, servo horn, servo saver, servo saver spring, shock mounts (F&R), and 2.5x18 mm screws (4)
Set of two drive yokes fit transmission or differentials. Includes 3x10 mm screw pins (2)
Lower left suspension arm fits front or rear For X-Maxx
The 4-amp NiMH fast charger uses a 12-volt DC power outlet for universal high-output charging. The charger is optimized for charging 6- or 7-cell (7.2 volt - 8.4 volt) Traxxas iD Power Cell NiMH batteries. Peak-detection circuitry makes sure the battery receives a full charge every time. The status LED flashes green to indicate when charging is in progress, then turns solid green when charging is complete for foolproof charging, peak performance, and maximum runtime. For NiMH batteries only. Do not use with LiPo batteries.
gray suspension arm mounts +/- 1° change the rear toe-in built into the stock suspension for different applications. For Nitro Rustler, Nitro Slash
